← Gesamte Rechtsvorschrift

Art. 5 ·

EU-Recht · · Quelle: EUR-Lex · Nicht mehr in Kraft

In EUR-Lex öffnen
Schriftgröße: 100 %

Article 5

Plastic crates or plastic pallets falling under this Decision are required to be introduced in a controlled distribution and reuse system complying with the following conditions:

new plastic crates or pallets containing the regulated metals shall be identified in a permanent and visible way,

a system of inventory and record keeping shall be established, including a method of regulatory and financial accountability, to document the compliance with the present Decision including the return rates, that is, the percentage of returnable entities which are not discarded after use but are returned to the manufacturer or packer/filler or an authorised representative and shall be as high as possible but in no case lower than 90 % over the life time of the plastic crates or plastic pallets. The system shall account for all the reusable entities put into, and removed from, service,

all returned entities that are no longer reusable shall be either disposed of by a procedure specifically authorised by the relevant authorities or be recycled in a recycling process, in which the recycled material is made up of plastic crates or plastic pallets in the circuit, and the introduction of external material is the minimum technically feasible, up to a maximum of 20 % by weight,

the manufacturer or his authorised representative shall draw up on an annual basis a written declaration of conformity, including an annual report demonstrating how the conditions of this Decision have been complied with. Possible changes to the system and authorised representatives shall be contained therein,

the manufacturer or his authorised representative shall keep this documentation at the disposal of the relevant national authorities for inspection purposes for at least four years,

where neither the manufacturer nor his authorised representative is established within the Community, the obligation to keep the technical documentation available is the responsibility of the person who places the product on the Community market.